Synchronize Menu Links

URL-Suffix

-industries$

Branches Follow

© Festo SE & Co. KG
Baumer - proportional pressure regulator VPPM
Proportional pressure regulator VPPM from Festo: the DPP piston pump regulates the air input pressure instead of the fluid pressure, and thus sets the required fluid pressure. The VPPM controls the air volume on the input side.
JPG (1.70 MB)TIF (7.83 MB)ZIP (9.53 MB)
© Festo SE & Co. KG
Baumer - twin-piston pump DPP
Twin-piston pump DPP from Baumer hhs: the centrepiece of the gluing process – the proportional valve VPPM from Festo can be seen at the bottom of the photo.
JPG (2.24 MB)TIF (9.83 MB)ZIP (12.07 MB)
© Festo SE & Co. KG
Baumer - high-precision gluing
High-precision gluing of folding boxes: systems from Baumer hhs make it possible to apply glue with millimetre accuracy without any contact with the blank, even at the highest production speeds.
JPG (2.32 MB)TIF (10.13 MB)ZIP (12.45 MB)
Frugalpac 5
De CPX-E-CEC Controller van Festo reguleert meerdere assen tegelijk om de complexe rondingen op de lijmbanen te kunnen maken, en de Festo CMMT servocontrollers worden gebruikt voor nauwkeurig en herhaalbaar laden, lijmen en afladen.
JPG (5.20 MB)ZIP (5.20 MB)
Frugalpac 4
Frugal Bottles worden geproduceerd uit twee kartonnen vellen en hierbij zijn complexe lijmpatronen vereist die kunnen worden aangepast aan verschillende profielen. 
JPG (4.46 MB)ZIP (4.46 MB)
© Festo SE & Co. KG
2022/11/11
|
Wereldwijd
Playing it safe in the assembly of MRI machines
The future belongs to human-robot cooperation. System builder BEC developed such a collaborative solution for ...
Persbericht lezen
The future belongs to human-robot cooperation. System builder BEC developed such a collaborative solution for Siemens Healthineers. It inserts coils weighing several tonnes precisely into the magnets of magnetic resonance imaging (MRI) machines. Electric cylinders from Festo, which ensure the coils are securely gripped, play a crucial role here.  
© Festo SE & Co. KG
BEC – Cooperation with Festo
Hans-Günther Nusseck, project manager at BEC (left), and Timo Kloker, sales engineer at Festo, discussing the use of the Festo electric cylinders in the system.
JPG (1.70 MB)TIF (14.13 MB)ZIP (15.83 MB)
© Festo SE & Co. KG
BEC – Hans-Günther Nusseck
Hans-Günther Nusseck, project manager at BEC 
JPG (2.09 MB)TIF (9.28 MB)ZIP (11.37 MB)
© Festo SE & Co. KG
BEC – Servo drive CMMT-ST
Practical: the drive amplifiers, in this case the servo drives CMMT-ST, are mounted on the robot itself, rather than on the gripper system. This frees up space on the gripper and makes it less complicated.
JPG (2.03 MB)TIF (8.94 MB)ZIP (10.97 MB)
© Festo SE & Co. KG
BEC – Supports with electric cylinders
Flexible, robust and precise: the supports with electric cylinders from Festo need to be powerful enough to be able to hold the coils weighing up to 1.5 tonnes, but at the same time not so powerful that they damage them.
JPG (1.94 MB)TIF (8.62 MB)ZIP (10.56 MB)